Hand Tools

RG36475 RIDGID RATCHET THREADER SET NPT 1/2"-2"

Ridgid RE 60 Electrical Tool

Ridgid Screwdriver 6-in-1 Tools Multi-Purpose Heavy duty (Gray/Orange)

Swaging Tools

Top screw bench chain vise

Ridgid Top Screw Bench Chain Vise BC210A 1/8-inch to 2-1/2-inch Bench Vise with Built-In Crank Handle,Red/Black,Small

Ridgid Top Screw Post Chain Vise No. 640 3.175 mm (1/8") - 127.mm (5")

RIGHT CUTTING OFFSET SNIPS - 48-22-4022 shopping for tin snips, and  specifically for aviation snips, you'll  notice several types: straight-cut,  right-cut and left-cut snips, often  marked with yellow, green and red,  respectively. Each is suited to specific  cutting tasks. The forged steel jaws  of these left-cutting or right  -cutting snips are set at a 90- degree angle to allow easy  gripping when cutting sheet metal  in tight spaces or overhead.  The operator can follow tight circular  or square pattern left or right  cuts with either a pushing or  pulling motion.Left cut snips are for making  to the left and straight cuts.  Right cut snips are for making straight  and cuts to the right. Straight cut snips (not shown) are for making straight cuts  and shallow cuts to the right or left. Right hand tin snips are suitable  for cutting straight lines and cutting  off in an anti-clockwise direction.  Best suited for right handed use.  hand tin snips are suitable for cutting  off in a clockwise direction and for  cutting straight lines. Best suited for  left handed use. Types of Tin Sni They are also useful for  making long cuts through  sheet metal, should you  need to. However,  you're going to make a  long cut through sheet metal,  especially a straight one, a pair of snips with offset handles is the  way to go. Each color signifies a  different direction that  the snips are made to cut.  Red snips cut left. Yellow snips  cut straight or left and right. Green snips cut right. HVAC and sheet metal  pros agree: When making long,  straight cuts in thinner-gauge  sheet metal, tinner snips are the  way to go. They're a simple, economical,  and durable cutting solution for many sheet  metal and HVAC applicatioN.

Used to join two pipes together. It is made of polypropylene, which is a type of plastic.

SATA Aviation Snips (10" LEFT, 10" STRAIGHT, 10" RIGHT)

SATA Tinner Snips (10" Straight, 12" Straight, 14" Straight, 16" Straight)

• 8 pc double-ended precision bits: PH #0 x SLOT 1.2 mm (3/64 in.), PH #00 x SLOT 3.0 mm (1/8 in.), PH #000 x SLOT 2.0 mm (5/64 in.), HEX 1.3 x SLOT 2.4 mm (0.05 x 3/32 in.), HEX 1.6 x SLOT 2.0 mm (1/16 x 5/64 in.), TORX T-5 x TORX T-8, TORX T-6 x TORX T-10, HEX #0 x HEX #1. • 1 pc 48 mm (2 in.) extension bar. • 1 pc storage tube. • 1 pc precision screwdriver handle. Description

SCREWDRIVER SET PRECISION 6-PC-ME545218

Description. The SDS-Max Professional Flat Chisel is intended for renovation, restoration and demolition. Shop SDS-Max chisels online at Ruwag for a versatile chisel bit that is compatible with SDS-Max shank systems. SDS chisels are ideal fo r heavy duty work in concrete, brick and masonry. Designed for use with an SDS machine, they have a break-resistant flute and a carbide tip for excellent strength and durability. Scaling chisels are idea l of cleaning concrete and removing scale and rust. Additionally, scaling chisels can be used for cutting troughs and some asphalt. The widened tip design allows for faster surface material removal. Our SDS products come in a selection of different types to ensure you have the exact bit for the job. Our collection contains high quality SDS chisels, including SDS Flat Chisels, SDS Pointed Chisels, SDS Tile Chisels, SDS Wide Chisels and SDS Gouging Chisels. The diameter of an SDS and SDS Plus shank is 10 millimeters. The difference is that SDS Plus have 4 splines in the shank tha t hold it more securely. Whereas the SDS Max is 18 millimeters. This means that SDS Max bits have an increased capability for tougher masonry work, withstanding more torque and force. Safety Data Sheets (SDS) provide critical information about the potential health and safety hazards of materials used in various industries. An SDS allows workers and emergency personnel to know the proper procedures for handling or working with a toxic or dangerous substance. Chisels have been used in various forms for thousands of years. However, despite the variety of different types, the basic use of a chisel remains the same. This hand-held tool features a distinctive cutting edge which is purpose-made for carving and cutting hard materials such as wood, stone, and metal.

Description. The SDS-Max Professional Flat Chisel is intended for renovation, restoration and demolition. Shop SDS-Max chisels online at Ruwag for a versatile chisel bit that is compatible with SDS-Max shank systems. SDS chisels are ideal fo r heavy duty work in concrete, brick and masonry. Designed for use with an SDS machine, they have a break-resistant flute and a carbide tip for excellent strength and durability. Scaling chisels are idea l of cleaning concrete and removing scale and rust. Additionally, scaling chisels can be used for cutting troughs and some asphalt. The widened tip design allows for faster surface material removal. Our SDS products come in a selection of different types to ensure you have the exact bit for the job. Our collection contains high quality SDS chisels, including SDS Flat Chisels, SDS Pointed Chisels, SDS Tile Chisels, SDS Wide Chisels and SDS Gouging Chisels. The diameter of an SDS and SDS Plus shank is 10 millimeters. The difference is that SDS Plus have 4 splines in the shank tha t hold it more securely. Whereas the SDS Max is 18 millimeters. This means that SDS Max bits have an increased capability for tougher masonry work, withstanding more torque and force. Safety Data Sheets (SDS) provide critical information about the potential health and safety hazards of materials used in various industries. An SDS allows workers and emergency personnel to know the proper procedures for handling or working with a toxic or dangerous substance. Chisels have been used in various forms for thousands of years. However, despite the variety of different types, the basic use of a chisel remains the same. This hand-held tool features a distinctive cutting edge which is purpose-made for carving and cutting hard materials such as wood, stone, and metal.

Japan Hand Tap set 3pcs

LITHIUM-ION BATTERY FOR EVERYDAY USE

Easy-to-adjust depth gauge to preselect drilling depth for blind holes STEPLESSLY adjustable side handle for secure two-handed control Forward/reverse switch for easily changing the working direction of the tool

Snap Ring Plier - Straight Internal 10"

Snap Ring Plier - Straight Internal 12"

Snap Ring Plier - Straight Internal 16"

Snap Ring Plier - Straight Internal 20"

Snap Ring Plier - Straight Internal 7"

TPT-30014-18 Heavy Duty 18” Locking C-Clamp Vise Grip Pliers (Silver)

8" Combination Pliers (Silver/Black)

1" Go Thru Wood Chisel

1/2" Go Thru Wood Chisel