Hardware

Flat Steel File

Door Closer EN24 BCA/DC with standard arm, With Hold open silver, Silver Finish

15mm thick particle board DF Melamine woodgain.

DOUBLE CYLINDER DEADBOLT

STRUT CHANNEL PRE GALVANIZED & HOT DIP GALVANIZED (PLAIN/SLOTTED)

12" Air Chuck With Rubber Hose

Outdoor Laminated Steel Padlock

Yale Handleset-Double Handle Evoke Series Dimple Key Antique Brass

Round Steel File

Door Closer with Slide Arm , Silver Finish

15mm thick particle board DF Melamine woodgain.

- Entrance lockset - Model HCL01/ET - Residential and commercial applications - Backset 60mm (2-3/8") - Fits door with 35mm (1-3/8") - to 50mm (2") thickness

Concealed Hinges

RIGHT CUTTING OFFSET SNIPS - 48-22-4022 shopping for tin snips, and  specifically for aviation snips, you'll  notice several types: straight-cut,  right-cut and left-cut snips, often  marked with yellow, green and red,  respectively. Each is suited to specific  cutting tasks. The forged steel jaws  of these left-cutting or right  -cutting snips are set at a 90- degree angle to allow easy  gripping when cutting sheet metal  in tight spaces or overhead.  The operator can follow tight circular  or square pattern left or right  cuts with either a pushing or  pulling motion.Left cut snips are for making  to the left and straight cuts.  Right cut snips are for making straight  and cuts to the right. Straight cut snips (not shown) are for making straight cuts  and shallow cuts to the right or left. Right hand tin snips are suitable  for cutting straight lines and cutting  off in an anti-clockwise direction.  Best suited for right handed use.  hand tin snips are suitable for cutting  off in a clockwise direction and for  cutting straight lines. Best suited for  left handed use. Types of Tin Sni They are also useful for  making long cuts through  sheet metal, should you  need to. However,  you're going to make a  long cut through sheet metal,  especially a straight one, a pair of snips with offset handles is the  way to go. Each color signifies a  different direction that  the snips are made to cut.  Red snips cut left. Yellow snips  cut straight or left and right. Green snips cut right. HVAC and sheet metal  pros agree: When making long,  straight cuts in thinner-gauge  sheet metal, tinner snips are the  way to go. They're a simple, economical,  and durable cutting solution for many sheet  metal and HVAC applicatioN.

Engine Cleaning Gun

Outdoor Laminated Steel Padlock

Yale Handleset Single Handle Evoke Series Dimple Key Antique Brass

Half Round Steel File

Ho Mechanism

Chain & Bolt EL650AB

15mm thick particle board DF Melamine woodgain.

FINISH: STAINLESS STEEL ANTIQUE BRASS BLACK NICKEL BLACK MATTE

HINGES 3.5X3.5X2.2MM STAINLESS STEEL YLGMLPHINGES35

Outdoor Laminated Steel Long Shackle Padlock

Yale Vertibolt Double Cylinder Dimple Key Antique Brass and Satin Nickel

Triangle Steel File

EN 3 Door Closer with slide channel arm , Silver finish

Door Guard - Polished Brass EL655AB

15mm thick particle board DF Melamine woodgain

Gr.3 sat. Stainless Steel Tubular Entrance