Powertools

Drills are commonly used in construction and carpentry work, as well as in plumbing and electrical work.

It is used to create holes in various materials, such as wood, metal, and plastic

Ken Li-on Cordless Drill BL7312

KEN Li-ion Cordless Impact Driver BL6412D

Ken Magnetic Drill MODELS - 6023N & 6028N

Ken 9500 Finishing Sander 260W 110x100mm

Ken 1982 Wood Planer 3-1/4" 710W

Hammer drills are not typically used for production construction drilling, but rather for occasional drilling of holes into concrete, masonry or stone.

KEN SHEAR ELECTRIC SCISSOR 2625

KEN Vertical Grinder 9725 A vertical grinder is a power tool used for grinding, also known as de-burring, fettling, polishing, sanding and buffing

KO SET, LS50L2,SB,1/2"-2"-RGGRLS50L11B

Left cut snips are for making to the left and straight cuts. Right cut snips are for making straight and cuts to the right. Straight cut snips (not shown) are for making straight cuts and shallow cuts to the right or left. Right hand tin snips are suitable for cutting straight lines and cutting off in an anti-clockwise direction. Best suited for right handed use. hand tin snips are suitable for cutting off in a clockwise direction and for cutting straight lines. Best suited for left handed use. Types of Tin Snips. When shopping for tin snips, and specifically for aviation snips, you'll notice several types: straight-cut, right-cut and left-cut snips, often marked with yellow, green and red, respectively. Each is suited to specific cutting tasks. The forged steel jaws of these left-cutting or right -cutting snips are set at a 90- degree angle to allow easy gripping when cutting sheet metal in tight spaces or overhead. The operator can follow tight circular or square pattern left or right cuts with either a pushing or pulling motion. They are also useful for making long cuts through sheet metal, should you need to. However, you're going to make a long cut through sheet metal, especially a straight one, a pair of snips with offset handles is the way to go. Each color signifies a different direction that the snips are made to cut. Red snips cut left. Yellow snips cut straight or left and right. Green snips cut right. HVAC and sheet metal pros agree: When making long, straight cuts in thinner-gauge sheet metal, tinner snips are the way to go. They're a simple, economical, and durable cutting solution for many sheet metal and HVAC applicatioN.

5” Air Orbital Sander (Black/Silver)

KEN BL7520-40B 20V LI-ION Cordless Impact Wrench (Brushless) c/w 2 Battery 1 Charger

LTH8620 Heat Gun

Impact Drill Tool Kit

LID13RE Impact Drill 13MM - 650W

1/2” Air Impact Wrench (Mini)

1/2HP 13MM Drill Press

1000W 4" Angle Grinder (Trigger)

1000W 4kg Rotary Hammer

10G Wet / Dry Vacuum + Blower

10mm 400W Rotary Drill

11pc Combination Wrench Set

12" 1800W Miter Saw (Dual Bevel)

12" Blower/Ventilator

12.5” Thickness Planer (Spiral Blade)

1200W Belt Sander

1350W 5kg Rotary Hammer

1400W Circular Saw Pro

15kg Hex Demolition Hammer PRO

16KG 30MM Hex Demolition Hammer

18V X-line Circular Saw Solo

18V X-line Circular Saw Solo

18V X-Line Glue Gun

18V X-line Impact Drill w/ 2pcs Battery & Charger

18V X-line Nailer Stapler

2 Stroke Brush Cutter